Request sizing
Vacuum freeze dryer · Industrial production

FD-60 industrial freeze dryer

Mid-range industrial capacity between the FD-30 and FD-100, with double-sided radiant shelf heating.

The INNOTECH FD-60 is an industrial vacuum freeze dryer that sits between the FD-30 and FD-100 in our range. It offers 60 m² of shelf area, water capture (ice condenser capacity) of 600 kg per batch, 100 kW of power and double-sided radiant shelf heating. A 60 m² INNOTECH system is already producing at a U.S. pet food plant.

Vacuum pumps and chamber of an INNOTECH FD-60 system
Commercial terms
01Lead time

Confirmed in the quotation, scheduled from the deposit

02Payment

T/T: 40% deposit, 60% balance before delivery. Final terms confirmed before contract

03Warranty

1 year from dispatch against workmanship defects; wear parts excluded

04Installation

Installation, commissioning and operator training by our engineers

Every machine passes a pre-delivery acceptance test at our factory.

At a glance

What this
system is for

StageIndustrial production
Key components

What sits behind the chamber

Refrigeration, vacuum and heating decide how fast and how evenly a batch dries. These are built and tested as part of every industrial system.

Technical parameters

FD-60
specifications

Figures from the FD-60 specification; final values per technical agreement.

ModelFD-60
Shelf area60 m²
Water capture (ice condenser capacity) / batch600 kg
Power100 kW / 380 V / 50 Hz (steam heating)
Heating modeDouble-sided radiant heating
Shelf temperatureAmbient to +95 °C
StructureSplit type
Overall dimensionsOn request
Tray sizeOn request
WeightOn request
Power consumptionOn request
ControlPLC
Common build standards
Chamber304 SUS · 6 mm
Design pressure−0.1 MPa
Vacuum leakage0.005 m³Pa/s
Inner roughnessRa ≤ 0.5 μm
Door angle> 110°
Door sealingMedical silicone
Observation windowΦ200 mm × 2
Temp sensorT thermocouple × 2
ControlPLC

Where the FD-60 sits in the range

ModelDrying areaWater capture (ice condenser capacity) / batchPower
FD-3030 m²400 kg75 kW
FD-6060 m²600 kg100 kW
FD-100100 m²1200–1300 kg170 kW

See a 60 m² system in production: U.S. pet food plant.

Other models in the range

Sizing help: How to choose an industrial freeze dryer · Freeze dryer ROI and running cost · Freeze dryers for pet food

Frequently asked questions

It fills the gap between them. The FD-60 has 60 m² of shelf area and water capture (ice condenser capacity) of 600 kg per batch; the FD-30 has 30 m² and 400 kg, the FD-100 100 m² and 1200–1300 kg. Water capture is the water removed per batch, not product output. Power is 100 kW.
Yes. A 60 m² INNOTECH system runs at a U.S. pet food plant on a beef and chicken formula, with a typical cycle of 20–24 hours. That is a project figure; your cycle depends on your product. Read the full project on our case study page.
By double-sided radiant heating: each shelf radiates heat to the trays above and below, which helps product on every level dry evenly. The heat source is confirmed for your site in the quotation.
Your material and its initial moisture, wet load per batch, daily output target, destination country, and voltage, frequency and available heat source. With those details an engineer confirms whether the FD-60 fits and prepares the quotation.

Is FD-60 the right fit for your line?

Tell us the material, wet load and daily target — an engineer will size it and quote.

Product catalogue

Get the full catalogue (PDF)

Every freeze dryer, drying and IQF model with specifications, build standards and what we need for a quotation. 6 pages, 1 MB.

We use your email only to follow up on this download. See our privacy policy.

WhatsApp Request sizing