Request sizing
Vacuum freeze dryer · R&D · small batch

FD-10 vacuum freeze dryer

Compact all-in-one for R&D and first small batches — connect water and power and run.

The INNOTECH FD-10 is an all-in-one vacuum freeze dryer for R&D and first small batches. It offers 10 m² of drying area and captures 120 kg of water per batch, draws 25 kW at 380 V/50 Hz, and heats its shelves from ambient to +95 °C by double-side radiation under PLC control. Lead time is within 30 days after deposit.

INNOTECH compact freeze dryer for R&D
Commercial terms
01Lead time

Within 30 days after deposit

02Payment

T/T: 40% deposit, 60% balance before delivery. Final terms confirmed before contract

03Warranty

1 year from dispatch against workmanship defects; wear parts excluded

04Installation

Video-guided installation and commissioning as standard; on-site installation available on request

Every machine passes a pre-delivery acceptance test at our factory.

At a glance

What this
system is for

StageR&D · small batch
IndustriesCoffee · produce · meat & seafood · dairy · pet food · herbal
ProcessFreeze ≤ −40 °C → vacuum sublimation → secondary drying; shelf ambient~+95 °C, PLC-logged
StructureAll-in-one
Compact series

Built and tested in our workshop

Technical parameters

FD-10
specifications

Figures from the FD-10 quotation; final values per technical agreement.

ModelFD-10
Freeze drying area10 m²
Water capture / batch120 kg
Power25 kw / 380V / 50Hz
Heating modeDouble-side radiation
Shelf temperatureAmbient to +95 °C
StructureAll-in-one
Overall dimensions3700×1400×1800 mm
Weight3000 kg
Power consumption12 kw/h
ControlPLC
Common build standards
Chamber304 SUS · 6 mm
Design pressure−0.1 MPa
Vacuum leakage0.005 m³Pa/s
Inner roughnessRa ≤ 0.5 μm
Door angle> 110°
Door sealingMedical silicone
Observation windowΦ200 mm × 2
Temp sensorT thermocouple × 2
ControlPLC

From pilot batch to production line

The FD-10 is where most projects start. Use it to fix your drying curve and real capacity, then move up the range:

StepModelWater capture / batch
Prove the processFD-10 (all-in-one)120 kg
Small-scale productionFD-20 (all-in-one)300 kg
Entry to industrial scaleFD-30 (split type)400 kg
Mass productionFD-100 (split type)1200–1300 kg
Flagship, with freezing roomFD-200 (split type)2400–3000 kg
Other models in the range

Sizing help: How to choose an industrial freeze dryer · Freeze dryer ROI and running cost · Freeze dryers for fruit & vegetables

Frequently asked questions

Teams that need to prove a product before buying production capacity: R&D, sample testing and first small batches. It is our smallest all-in-one model, with 10 m² of drying area and 120 kg of water capture per batch.
The FD-10 lead time is within 30 days after the deposit. The exact schedule is confirmed in the quotation. Every machine passes a pre-delivery acceptance test at our factory before it is released.
It is an all-in-one cabinet with electric heating: connect water and power and it runs. The listed supply is 25 kW at 380 V/50 Hz; the machine measures 3700×1400×1800 mm and weighs 3000 kg. Other voltages and frequencies can be built to your destination.
Usually not. The FD-10 comes with video-guided installation and commissioning as standard, so your own team can set it up with our engineers guiding them remotely. On-site installation is available on request.
Yes. The PLC logs every parameter, so the drying curve you prove on the FD-10 can be scaled to our split-type industrial models, FD-30 to FD-200. We validate your material on a pilot unit first, then size the production system.

Is FD-10 the right fit for your line?

Tell us the material, wet load and daily target — an engineer will size it and quote.

Product catalogue

Get the full catalogue (PDF)

Every freeze dryer, drying and IQF model with specifications, build standards and what we need for a quotation. 6 pages, 1 MB.

We use your email only to follow up on this download. See our privacy policy.

WhatsApp Request sizing