Request sizing
Vacuum freeze dryer · Industrial production

FD-200 industrial freeze dryer

Flagship split-type industrial system with freezing room — vacuum ≤2.7 Pa, cold trap ≤−65 °C, 202 m² drying area and 2,400–3,000 kg water capture per batch.

The INNOTECH FD-200 is our flagship split-type industrial freeze dryer and the only model in the range supplied with a freezing room. It offers 202 m² of drying area and 2400–3000 kg of water capture per batch, with 350 kW at 380 V/50 Hz, steam heating, vacuum of ≤2.7 Pa and a cold trap at ≤−65 °C. The same flagship unit is used on a freeze-dried instant coffee line.

Water capture is not fresh-product loading or daily output; an engineer will size it from the material, wet load and daily target.

Industrial freeze dryers with external condensers
Commercial terms
01Lead time

Confirmed in the quotation, scheduled from the deposit

02Payment

T/T: 40% deposit, 60% balance before delivery. Final terms confirmed before contract

03Warranty

1 year from dispatch against workmanship defects; wear parts excluded

04Installation

Installation, commissioning and operator training by our engineers

Every machine passes a pre-delivery acceptance test at our factory.

At a glance

What this
system is for

StageIndustrial production
IndustriesCoffee · produce · meat & seafood · dairy · pet food · herbal
ProcessFreeze ≤ −40 °C → vacuum sublimation → secondary drying; shelf ambient~+95 °C, PLC-logged
StructureSplit type · freezing room included
Key components

What sits behind the chamber

Refrigeration, vacuum and heating decide how fast and how evenly a batch dries. These are built and tested as part of every industrial system.

Technical parameters

FD-200
specifications

Figures from the FD-200 quotation; final values per technical agreement.

ModelFD-200
Freeze drying area202 m²
Water capture / batch2400–3000 kg
Power350 kW / 380 V / 50 Hz (steam heating)
Heating modeDouble-side radiation
Shelf temperatureAmbient to +95 °C
StructureSplit type · freezing room included
Weight28000 kg
ControlPLC
Common build standards
Chamber304 SUS · 6 mm
Design pressure−0.1 MPa
Vacuum leakage0.005 m³Pa/s
Inner roughnessRa ≤ 0.5 μm
Door angle> 110°
Door sealingMedical silicone
Observation windowΦ200 mm × 2
Temp sensorT thermocouple × 2
ControlPLC

Supply scope for an FD-200 project

ScopeINNOTECH suppliesYou provide
Single machineDesign, manufacture, factory acceptance test, export packing, documents; our engineers on site to install, commission and train operatorsSite preparation and utilities, plus local installation labour to support our engineers
Complete lineThe above, plus process design and line layoutBuilding, utilities, operators
Turnkey projectThe above for the whole line, installed: on-site installation, commissioning and training across the lineBuilding, permits, raw material, staff
Other models in the range

Sizing help: How to choose an industrial freeze dryer · Freeze dryer ROI and running cost · Freeze dryers for pet food

Frequently asked questions

A freezing room is part of the FD-200 system, so product can be frozen before it enters the 202 m² drying chamber. It also lists vacuum of ≤2.7 Pa, a cold trap at ≤−65 °C, and 2,400–3,000 kg water capture per batch.
Yes. Every machine is run and tested at our factory before release, and we welcome factory visits or live video inspections. Agree the test items in the contract and keep the recorded values as your baseline after installation.
Typically FOB or CIF from Qingdao, the major port closest to our factory in Shandong. The system weighs 28000 kg and large chambers can need special containers, so packaging and container type are confirmed in the contract.
A turnkey project covers the whole line, installed: design, manufacture, factory acceptance test, export packing and documents, process design and line layout, with our engineers installing, commissioning and training on site. You provide the building, permits, raw material and staff.

Is FD-200 the right fit for your line?

Tell us the material, wet load and daily target — an engineer will size it and quote.

Product catalogue

Get the full catalogue (PDF)

Every freeze dryer, drying and IQF model with specifications, build standards and what we need for a quotation. 6 pages, 1 MB.

We use your email only to follow up on this download. See our privacy policy.

WhatsApp Request sizing