Request sizing
Vacuum freeze dryer · Industrial production

FD-30 industrial freeze dryer

Entry to industrial scale — unit and chamber installed separately, double-side radiation heating.

The INNOTECH FD-30 is a split-type vacuum freeze dryer and the entry point to industrial-scale freeze-drying. Its refrigeration unit and drying chamber are installed separately. It offers 30 m² of drying area and 400 kg of water capture per batch, with 75 kW at 380 V/50 Hz, steam heating and double-side radiation shelves. It is also used as the industrial entry point on an instant coffee freeze-drying line.

Industrial chamber, door open
Commercial terms
01Lead time

Confirmed in the quotation, scheduled from the deposit

02Payment

T/T: 40% deposit, 60% balance before delivery. Final terms confirmed before contract

03Warranty

1 year from dispatch against workmanship defects; wear parts excluded

04Installation

Installation, commissioning and operator training by our engineers

Every machine passes a pre-delivery acceptance test at our factory.

At a glance

What this
system is for

StageIndustrial production
IndustriesCoffee · produce · meat & seafood · dairy · pet food · herbal
ProcessFreeze ≤ −40 °C → vacuum sublimation → secondary drying; shelf ambient~+95 °C, PLC-logged
StructureSplit type
Key components

What sits behind the chamber

Refrigeration, vacuum and heating decide how fast and how evenly a batch dries. These are built and tested as part of every industrial system.

Technical parameters

FD-30
specifications

Figures from the FD-30 quotation; final values per technical agreement.

ModelFD-30
Freeze drying area30 m²
Water capture / batch400 kg
Power75 kW / 380 V / 50 Hz (steam heating)
Heating modeDouble-side radiation
Shelf temperatureAmbient to +95 °C
StructureSplit type
Overall dimensions8000×2000×2800 mm
Tray size1000×580×35 mm
Weight7000 kg
ControlPLC
Common build standards
Chamber304 SUS · 6 mm
Design pressure−0.1 MPa
Vacuum leakage0.005 m³Pa/s
Inner roughnessRa ≤ 0.5 μm
Door angle> 110°
Door sealingMedical silicone
Observation windowΦ200 mm × 2
Temp sensorT thermocouple × 2
ControlPLC

Which industrial model fits your batch size?

ModelDrying areaWater capture / batchPowerStructure
FD-3030 m²400 kg75 kW (steam heating)Split type
FD-100100 m²1200–1300 kg170 kW (steam heating)Split type
FD-200202 m²2400–3000 kg350 kW (steam heating)Split type · freezing room included

Size by water capture, not just area: work out how much water your daily target contains, then pick the model. How to choose an industrial freeze dryer.

Other models in the range

Sizing help: How to choose an industrial freeze dryer · Freeze dryer ROI and running cost · Freeze dryers for pet food · Freeze dryers for fruit & vegetables

Frequently asked questions

The refrigeration unit and the drying chamber are installed separately instead of sharing one cabinet. This allows higher capacity and easier maintenance access, which is why every model from the FD-30 up is split type.
The FD-30 is listed with steam heating: plant steam heats the shelves and reduces the electrical load. It suits sites that run, or can add, a boiler. If your site has no steam, tell us the available heat source and an engineer will advise on the configuration.
Our engineers. Industrial systems from FD-30 to FD-200 include on-site installation, commissioning and operator training, plus freeze-drying process R&D support and long-term after-sales service.
The overall dimensions are 8000×2000×2800 mm and the weight is 7000 kg. Trays measure 1000×580×35 mm. Final values and the layout are fixed in the technical agreement.
The FD-30 is where our coffee, pet food and meat and seafood lines start. It is also used for fruit and vegetables. Send your material and daily target and we will confirm whether the FD-30 or a larger model fits.

Is FD-30 the right fit for your line?

Tell us the material, wet load and daily target — an engineer will size it and quote.

Product catalogue

Get the full catalogue (PDF)

Every freeze dryer, drying and IQF model with specifications, build standards and what we need for a quotation. 6 pages, 1 MB.

We use your email only to follow up on this download. See our privacy policy.

WhatsApp Request sizing